Paper craft · Growing · about 20 minutes
Six-Point Paper Snowflake
Uses scissors · No glue · Adult help suggested
- Thin printer paper, printed with the template, 216 x 279 mm (8.5 x 11 in (Letter) or A4)
- Blunt-tip scissors
- Ruler (to check the scale bar)
For the grown-up: Twelve layers are thick: help with the outer cut, and hold the folded point so the layers do not slip while your child cuts the notches.
Safety: Use blunt-tip scissors and cut away from your fingers.
Blue dashes: valley fold (toward you). Pink dash-dot: mountain fold (away from you). Thick line with scissors: cut. Yellow: glue.
-
Start. Print the template at 100% (Actual size) on thin paper and check the 5 cm bar with a ruler. Lay it printed side up.
-
1. Cut: Cut out the square along its outside line.
-
2. Mountain fold: Fold the square in half along line 1: fold the top left half behind. You now have a triangle with the print on top.
-
3. Mountain fold: Fold the top part behind along line 2. The fold starts at the center dot.
-
4. Mountain fold: Fold the left part behind along line 3. Now three equal parts are stacked, each a 60-degree slice around the center dot.
-
5. Mountain fold: Fold the slice in half behind along line 4, the middle line. The cutting pattern is on top, with 12 layers under it.
-
6. Cut: Hold the layers tight and cut along the slanted outer line through all of them. The extra paper falls away.
-
7. Cut: Cut out the three small gray shapes: one notch on each folded edge and the tip at the center dot.
-
8. Unfold: Unfold the paper slowly and press it flat. Your snowflake has six points!
If something goes wrong
- The snowflake has three big points and three small ones. The two outer parts were not folded exactly on lines 2 and 3. Line their edges up with the printed lines and press flat before cutting.
- The scissors will not cut through. Use thinner paper, or ask an adult to cut the outer line while you hold the folded point.
- The snowflake falls apart when you open it. Do not cut all the way across a folded edge; the notches must stop inside the paper.